1.Being responsible for supplier sourcing and selection for AHSC according to Amphenol Purchasing Procedure and in alignment with AHSC business objectives.

2.Working closely with Engineering and Prod

Mechanical Engineer（机械工程师/工装治具设计工程师）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Design new fixtures to improve productivity, effici

1.Responsible for developing hardware design for 400G/800G/1.6T or higher data-rate ACC /AEC products and systems.

负责400G/800G/1.6T或更高数据速率ACC /AEC产品和系统的硬件设计开发。

2.Develop hardwa

NPI Engineer

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Project management - kick off NPI meeting and leading team to work out samples to prod

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，质量及产量提升，成本节约项目；

2.Use SolidW

Connector research and development, include but not be limited:

1.Technical communication with customer, confirm customer applications and technical requirements.

2.Translate customer’s requirement

Would you like to be the manager of the Procurement & Supply Chain of a technological and international Company?

Here’s the opportunity to lead an energetic and passionate team.

You’ll be par

职位职位:

1.对公司订单产品质量进行检验和跟踪

inspect and monitor the quality of products before shipment；

2. 用英文书写提交验货报告

summit inspection report by English；

3. 对供应商生产规模及

负责制定产品试验规范和测试方法，正确掌握试验方法.

Responsible for product testing specification and test method, to perform test correctly.

负责制定试验任务计划并跟踪进度，按时完成

Responsible for

At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are ke

1.为客人提供快速热情的餐饮服务，根据设定的标准确保餐饮外观的质量

Provide fast and courteous service of food and beverages to guests and ensure quality of food and beverage presentation per establishe

Responsibilities:

1．Responsible for internal high-speed and wireharness cable assembly design.

负责内部高速和线束电缆组件设计。

2．To provide product proposal, drawing, quotation, sampling, EBOM,

岗位职责：

Responsibility:

1. To handle customer’s sample orders （including new orders and order changes）, to ensure the accuracy of customer requirements；

负责样品订单（包括新订单，订单变更）

岗位职责:

1. 评估新产品导入的品质风险，制订质量管控点以及管控方法；

2. 制订新产品测试验证计划和量产ORT计划，确认测试治具/设备；

3. 分析、改善制程异常，主导以及推进量产产品的持续改善；

4. 策划质量

岗位职责：

1.Understand customer‘s material requirement planning, new project introduction, continuity of supply, field service support, reporting etc；

了解客户的材料需求计划、新项目介绍、供应的连

工作职责：

1. Identify research, evaluate and select suppliers that meet the organization’s standards of price, quality, timing and reliability of supply. Identify research, evaluate and coordinate

岗位职责：

1、执行与管理门店，对门店进行QSC巡检（Q:商品质量（QUALITY）、S:服务质量（SERVICE）、C:清洁状况（CLEANLI-NESS））.

2、按照公司要求对门店进行监督，不合理行为进行纠偏和杜绝，对原物料外

HAECO HONG KONG Buyer 1/ Buyer 2-Mainland China

Key Accountabilities and Responsibilities

Support Material Control team and Material Planning team to manage aviation spare orders to meet the req

Be responsible for the project management through project life cycle, including: execution schedule, scope and change, accounts receivable, communication, risk/opportunity, cost and profit, quality et

Tasks

? Translate the applicable procurement/category strategy and the input from Category Buyers into a procurement plan and budget for the own portfolio, acquire approval and execute own procuremen

Task:

1. Manage the material testing lab, delivering a highly qualified testing service system.

2. Develop and maintain quality management system in the test center, including all relevant documents

Tasks:

1. Discussing the work with, head of welding department, senior welding engineer, colleague supervisors, foremen and quality control coordinators.

2. Implement and monitor compliance with

Tasks

Design:

1. Performs medium complex tasks within the standards

2. Design of control cabinets conform manual and based on detailed design in order to efficiently create electrical diagrams of H

Tasks:

Progress and Quality:

Monitoring and adding to the quality of goods and services within the project in accordance with project requirements.

1. Participating in project meetings and （contri

Task:

1. Translating and inventorying customer demands to internal requests；

2. Propose the most suitable solution with involving colleagues from different disciplines；

3. Coordinate the communic

Responsibilities：

1. Understand LED driver basic knowledge. For example: CV,CC,LED mode.

2. Understand LED driver measurement parameters. For example. Power, current, PF, THD, efficiency.

3. Basic

Job responsibilities,

Design and implement automated assembly and test lines for multiple manufacturing sites that produce lamps, luminaires, and LED drivers.

Research and develop advanced automatio

1.Full-time bachelor degree or above of science and engineering, major in electrical, mechanical and material is preferred.

2.More than 5 years working experience as quality manager in manufacturing

1.Bachelor degree above, marketing, business administration, engineering is preferred；

2.English communication skills （both written and oral）；

Main Responsibilities:

1.Manage and develop new

负责厨房运营，保证食品的最高质量，控制食品成本，在酒店的指导原则下获得利润最大化。执行食品卫生要求，协助行政副总厨制作英才餐厅菜单。

To be responsible for the proper efficiency and profitable functio