主要负责协助模具设计工程师完成图纸设计工作。能吃苦耐劳，有责任心，应届生皆可。一经录用，待遇从优，公司提供工作餐和五险一金。

The main duties is to help the mold design engineer to finish the drawing.

负责出入工厂的产品检验。能吃苦耐劳，有责任心，应届生皆可。一经录用，待遇从优，公司提供工作餐和五险一金。

The main duties is to take responsible for the inspection of products that access to factory.Y

模具或机械类专业，中专以上文化程度，熟练使用3D和2D设计软件，具有创新和团队精神，有责任心。一经录用，待遇从优，公司提供工作餐和五险一金。

You should be major in mold or mechanical and educated over ju

岗位概述：

Responsible for mechanical supplier management, procurement strategies development, cost analysis & control, and contract management. Be responsible for sourcing and localizing new mechan

Task:

1. Translating and inventorying customer demands to internal requests；

2. Propose the most suitable solution with involving colleagues from different disciplines；

3. Coordinate the communic

Responsibilities：

1） Provide leadership and direction to cross-functional teams empowered to execute the Lean Six Sigma strategy for process improvement, productivity improvement and cost reductio

工作要求：

1、生产设备项目执行，进度跟进，确认改善，项目WBS进度每周更新。

2、负责公司新引入生产设备配置的评估。

3、负责生产设备优化，改造。

4、负责协助生产设备组完成设备重大故

工作内容：

1-Responsible for EBM tools regular maintenance and writer parameter control.

2-Mask CD control and CD production anomaly handling.

3-Taking chage of writer related Mask defect analysis

工作内容：

1-Responsible for repair tools maintenance and basic tool down recovering.

2-Tool parts evaluation and purchasing.

3-Taking charge of tool down root cause analysis, continuous-improvemen

Task:

1. Independently make and adjust shop drawings according the drawing manual, on basis of a detailed design

2. Gather signatures on the drawing for approval

3. Deliver the signed drawing （pa

Connector research and development, include but not be limited:

1.Technical communication with customer, confirm customer applications and technical requirements.

2.Translate customer’s requirement

职位职位:

1.对公司订单产品质量进行检验和跟踪

inspect and monitor the quality of products before shipment；

2. 用英文书写提交验货报告

summit inspection report by English；

3. 对供应商生产规模及

岗位职责：

1、主导研究增强产品竞争力的结构设计和解决方案，在产品规划和设计早期预见复杂结构技术风险并提供解决方案；

2、主导攻克机械运动、结构相关的疑难问题，提炼原理性结论，形成规范化的设计；

3、负

岗位要求：

1.有良好的职业操守 Good Character and Ethics.

2.具有3年以上5星级酒店楼层主管工作经验 With 3 years working experience in more than 5 - star hotel Floor Supervisor

具有部门培训经验

Firmware Engineer（固件工程师）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job Description:

工作职责：

1.Response for hardware and software development for EEPROM

岗位职责：

1、执行与管理门店，对门店进行QSC巡检（Q:商品质量（QUALITY）、S:服务质量（SERVICE）、C:清洁状况（CLEANLI-NESS））.

2、按照公司要求对门店进行监督，不合理行为进行纠偏和杜绝，对原物料外

工作内容：

1.相关体系的认证及完善 （ISO、GMP、CMMI 等等）；

2.能够主导验厂事项（BSCI验厂、质量验厂）

3.主管技术措施和技术、质量、安全的交底工作；

4.建立完善公司质量培训教材，体系；

5.负责公司产品

制程工程师/Process Engineer（外派墨西哥）

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，

1.Being responsible for supplier sourcing and selection for AHSC according to Amphenol Purchasing Procedure and in alignment with AHSC business objectives.

2.Working closely with Engineering and Prod

1.与国内客户直接沟通，与国外同事沟通, 能提供专业的技术进行线缆组件设计和项目管理工作。需要具备基本的信号完整性知识和56G或112G线缆组件产品开发经验。

2.制作成品图纸和零件图纸, 物料清单。

3.与各职能单

PE Assistant Manager PE助理经理

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Supervise, coach and support process team’s daily work and provide

Mechanical Engineer（机械工程师/工装治具设计工程师）

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Design new fixtures to improve productivity, effici

1.High speed bulk cable design for 32Gbps, 56Gbps, 112Gbps, 224Gbps and beyond.

负责32Gbps、56Gbps、112Gbps、224Gbps及以上高速线束设计。

2.Raw cable simulation, optimization to meet cable assembly m

NPI Engineer

上班时间：8：30- 17：30

上班地址：厦门火炬高新区新丰路176号（小东山站附近）

Job description:

1.Project management - kick off NPI meeting and leading team to work out samples to prod

Signal Integrity Engineer（SI工程师，信号完整性工程师）

Job description:

1. Work with mechanical engineer to develop cable assembly designs in response to specific customer needs. 根据客户的具体需求

Job Responsibilities:

1.Process development/improvement, defect analysis, quality/productivity improvement, cost reduction.

负责制程开发及改善，异常分析，质量及产量提升，成本节约项目；

2.Use SolidW

1.Implement projects in the product development involving all required multi-local resources to meeting the customer requirements.

在产品开发过程中与公司内部各相关部门沟通协调，统筹资源，满足客户需求

Assist the Engineering superior with general hotel and building maintenance and ensure that work is completed to a high standard within your established trade which meets the needs and expectations of

Main Responsibilities:

*Process Establishment, Maintenance and Control

-Determines the test process and optimize test specs / procedures based on that process

-Generates test programs, fixtures an

Main Responsibilities:

Perform Effective Supplier Audit

1. Define audits and surveys to ensure that all suppliers are meeting our business requirements to include flow down and quality standards

2.